A-A-20051E
7.2 Product verification sampling. When USDA verification of analytical requirements is specified in the solicitation, contract, or purchase order, analytical testing shall be performed on a composite sample. The composite sample shall be 227 g (8 oz) prepared from five randomly
selected subsamples. Subsamples shall be a minimum of one can/container and shall contain the appropriate number of cans/containers to yield a 227 g (8 oz) sample when composited.
7.3 Analytical testing. When specified in the solicitation, contract, or purchase order, the analyses shall be in accordance with the following methods from the Official Methods of Analysis of the AOAC International:
Test Method
Total solids 935.56 pH 981.12G Fat 989.05
7.4 Test results. The test results for total solids and fat shall be reported to the nearest 0.1 percent. The test result for pH shall be reported to the nearest 0.1 value. Any result not conforming to the analytical requirements shall be cause for rejection of the lot.
8. MANUFACTURER'S/DISTRIBUTOR'S PRODUCT ASSURANCE. The manufacturer/ distributor shall certify that the puddings provided shall meet the salient characteristics of this CID, conform to their own specifications, standards, and quality assurance practices, and be the same puddings offered for sale in the commercial market. The purchaser reserves the right to require proof of conformance.
9. REGULATORY REQUIREMENTS. The delivered puddings shall comply with all applicable Federal, State, and local mandatory requirements and regulations relating to the preparation, packaging, labeling, storage, distribution, and sale of puddings within the commercial marketplace. Delivered puddings shall comply with all applicable provisions of the Federal Food, Drug, and Cosmetic Act, the Fair Packaging and Labeling Act, and regulations promulgated thereunder. The delivered puddings shall comply with the allergen and flavor labeling requirements of the Federal Food, Drug and Cosmetic Act.
10. QUALITY ASSURANCE PROVISIONS. Purchaser shall specify 10.2 or 10.3;
purchaser may specify 10.1 with 10.1.1 or 10.1 with 10.1.2.
10.1 Manufacturer's quality assurance. When required in the solicitation, contract, or purchase order, the product manufacturer shall be required to provide evidence, by certificate, that the manufacturing plant has undertaken one of the following quality assurance measures within 12 months prior to providing a bid, or no later than 10 business days from the date of
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business